FIXED ELECTRICAL INSTALLATION / PERIODIC
TESTING

'' The purpose for periodic inspection and testing is to provide, so far as reasonably practicable, for:

(i) the safety of persons and livestock against the effects of electric shock and burns in accordance in accordance with the general requirements of regulation 130-01, and

(ii). protection against damage to property by fire and heat arising from an installation defect, and

(iii). confirmation that the installation is not damaged or deteriorated so as to impair safety, and

(iv). the identification of installation defects and non-compliance with the requirements of the Regulations which may give rise to danger.

Consequently: legislation requires that electrical installations are maintained in a safe condition and therefore must be periodically inspected and tested.''

Extract from BS 7671: 2001 Requirements for Electrical Installations Guidance Note 3. Section 3.1 - 3.2.

TCS only carryout a full Periodic Inspection of your installation. At no time do we carryout ‘sampling’, which has the potential to leave you legally responsible for any installation failure of your premises.

All our work is carried out to the relevant British Standards and all our work is supplied with the relevant British Standard test certificate. This gives you the piece of mind that your electrical installations are compliant to legislation meeting your legal requirements.

We are proud to have been awarded the world renowned British Standard Kitemark for the quality of our services.